The LowPro™ Low-Profile Aluminum RMR Red Dot Mount for Ruger Mark I/II/III/IV pistols is an ultra-low-profile mounting plate for attaching a red dot with an RMR footprint directly to the barrel of a Ruger Mark I/II/III/IV.
Key features
- At only 1mm (0.04") thick, this is the lowest profile mount on the market and is less than half the thickness of alternative mounting plate options
- Made out of durable and lightweight aluminum
- Alignment pins keep red dot secure and zeroed
Includes
- (1) LowPro™ aluminum RMR mounting plate
- (1) T10 Torx key
- (2) #6-48 x 1/4" flat head screws (T10 torx)
- (2) #6-32 x 8.7mm flat head screw (T10 torx)
- (1) Installation instructions card
Compatibility
Compatible firearms
Compatible with all Ruger Mark series pistols (I, II, III, and IV) with threaded holes on top of the upper except for the Mark IV 22/45 Tactical Silencer Shop Exclusive models (40179, 40181, 40182, 40186, & 40193). Also compatible with TacSol Pac-Lite uppers, however, please note that TacSol Pac-Lite uppers have #6-40 threaded holes and Ruger uppers have #6-48 threaded holes. Therefore, you must order these screws if you plan to attach a LowPro mount to a TacSol Pac-Lite upper.
Compatible red dots
Compatible with any red dot that uses an RMR footprint including, but not limited to:
- ADE Artemis (RD3-022)
- ADE Raptor (RD3-020)
- ADE Stingray (RD3-019)
- ADE Trumpet (RD3-029)
- ADE Valkyrie (RD3-023)
- AMERIGLO HAVEN
- ARORY HD2417KFP
- Athlon Midas Flash
- Axeon MDPR1 Mini
- Bushnell RXM-300
- CVLIFE WolfCovert
- Cyelee Bear
- Cyelee Bull PRO
- Cyelee Bull X PRO
- Cyelee CT2
- Cyelee Ghost HDG
- Cyelee WOLF PRO
- Cyelee WOLF X PRO
- Cyelee Wolf0
- Cyelee WOLF2
- Foxarmy FXA10
- Foxarmy FXA12
- Foxarmy FXA12 PRO
- Gideon Alpha
- Gideon Omega
- Gideon Rock
- Holosun 407A3 X2
- Holosun 407C X2
- Holosun 507C X2
- Holosun 507COMP
- Holosun 508T X2
- Holosun 509T X2
- Meprolight MPO Pro-DF
- Meprolight MPO Pro-F
- Meprolight MPO-F
- NcSTAR VISM FlipDot Pro
- Primary Arms Classic Series
- Primary Arms Classic Series Gen 2
- Riton 3 Tactix MPRD 2
- Riton 3 Tactix MPRD 3
- Riton 3 Tactix PRD 2
- Riton 3 Tactix PRD 3
- SECDES DEMON
- Swampfox Justice
- Swampfox Kingslayer
- Swampfox Liberty
- Tacticon Predator V4
- Trijicon RCR
- Trijicon RMR
- Trijicon RMR HD
- Trijicon RMR Type 2
- Trijicon SRO
- TRUGLO TRU•TEC MICRO
- TRUGLO XR24
- TRUGLO XR29
- UTG OP3 Micro for RMR
- UTG OP3 Micro SLS for RMR
- UUQ EagleC28
- UUQ HD1079
- Vector Frenzy-X
- Viridian RFX35
- Viridian RFX45
- VOTATU PMD504-G
- Zulisy OAK
- Zulisy OAK Plus
- Zulisy OAKc
Q: Will I be able to co-witness the stock iron sights using this mount?
A: No. Even though LowPro mounts are the lowest profile red dot mounting plates on the market, you still won’t be able to co-witness the stock iron sights. However, some customers have reported being able to co-witness with taller, aftermarket front sights from Dawson Precision.
Q: Are the mounts compatible with TacSol Pac-Lite uppers?
A: Yes. LowPro mounts are compatible with TacSol Pac-Lite uppers. However, please note that TacSol Pac-Lite uppers have #6-40 threaded holes and Ruger uppers have #6-48 threaded holes. Please reach out via our Contact Us for screw options.
